The addition of water to native cellulose/1-ethyl-3methylimidazolium acetate solutions catalyzes the formation of gels, where polymer chain-chain intermolecular associations act as cross-links. However, the relationship between water content (Wc), polymer concentration (Cp), and gel strength is still missing. This study provides the fundamentals to design water-induced gels. First, the sol-gel transition occurs exclusively in entangled solutions, while in unentangled ones, intramolecular associations hamper interchain cross-linking, preventing the gel formation. In entangled systems, the addition of water has a dual impact: at low water concentrations, the gel modulus is water-independent and controlled by entanglements. As water increases, more cross-links per chain than entanglements emerge, causing the modulus of the gel to scale as Gp ∼ C p^2 Wc^3.0±0.2. Immersing the solutions in water yields hydrogels with noncrystalline, aggregate-rich structures. Such water-ionic liquid exchange is examined via Raman, FTIR, and WAXS. Our findings provide avenues for designing biogels with desired rheological properties.

The interplay of soft responsive particles, such as microgels, with nanoparticles (NPs) yields highly versatile complexes that show great potential for applications, ranging from plasmonic sensing to catalysis and drug delivery. However, the microgel–NP assembly process has not been investigated so far at the microscopic level, thus hindering the possibility of designing such hybrid systems a priori. In this work, we combine state-of-the-art numerical simulations with experiments to elucidate the fundamental mechanisms taking place when microgel–NP assembly is controlled by electrostatic interactions and the associated effects on the structure of the resulting complexes. We find a general behavior where, by increasing the number of interacting NPs, the microgel deswells up to a minimum size after which a plateau behavior occurs. This occurs either when NPs are mainly adsorbed to the microgel corona via the folding of the more external chains or when NPs penetrate inside the microgel, thereby inducing a collective reorganization of the polymer network. By varying microgel properties, such as fraction of cross-linkers or charge, as well as NP size and charge, we further show that the microgel deswelling curves can be rescaled onto a single master curve, for both experiments and simulations, demonstrating that the process is entirely controlled by the charge of the whole microgel–NP complex. Our results thus have a direct relevance in fundamental materials science and offer novel tools to tailor the nanofabrication of hybrid devices of technological interest.

We explore the impact of three water-soluble polyelectrolytes (PEs) on the flow of concentrated suspensions of poly(N-isopropylacrylamide) (PNIPAm) microgels with thermoresponsive anionic charge density. By progressively adding the PEs to a jammed suspension of swollen microgels, we show that the rheology of the mixtures is remarkably influenced by the sign of the PE charge, PE concentration and hydrophobicity only when the temperature is raised above the microgel volume phase transition temperature Tc, namely when microgels collapse, they are partially hydrophobic and form a volume-spanning colloidal gel. We find that the original gel is strengthened close to the isoelectric point, attained when microgels are mixed with cationic PEs, while PE hydrophobicity rules the gel strengthening at very high PE concentrations. Surprisingly, we find that polyelectrolyte adsorption or partial embedding of PE chains inside the microgel periphery occurs also when anionic polymers of polystyrene sulfonate with high degree of sulfonation are added. This gives rise to colloidal stabilization and to the melting of the original gel network above Tc. Contrastingly, the presence of polyelectrolytes in suspensions of swollen, jammed microgels results in a weak softening of the original repulsive glass, even when an apparent isoelectric condition is met. Our study puts forward the crucial role of electrostatics in thermosensitive microgels, unveiling an exciting new way to tailor the flow of these soft colloids and highlighting a largely unexplored path to engineer soft colloidal mixtures.

Liquid mixtures composed of colloidal particles and much smaller non-adsorbing linear homopolymers can undergo a gelation transition due to polymer-mediated depletion forces. We now show that the addition of linear polymers to suspensions of soft colloids having the same hydrodynamic size yields a liquid-to-gel-to-re-entrant liquid transition. In particular, the dynamic state diagram of 1,4-polybutadiene star–linear polymer mixtures was determined with the help of linear viscoelastic and small-angle X-ray scattering experiments. While keeping the star polymers below their nominal overlap concentration, a gel was formed upon increasing the linear polymer content. Further addition of linear chains yielded a re-entrant liquid. This unexpected behavior was rationalized by the interplay of three possible phenomena: (i) depletion interactions, driven by the size disparity between the stars and the polymer length scale which is the mesh size of its entanglement network; (ii) colloidal deswelling due to the increased osmotic pressure exerted onto the stars; and (iii) a concomitant progressive suppression of the depletion efficiency on increasing the polymer concentration due to reduced mesh size, hence a smaller range of attraction. Our results unveil an exciting new way to tailor the flow of soft colloids and highlight a largely unexplored path to engineer soft colloidal mixtures.

Poly(N-isopropylacrylamide)-based microgels are soft colloids undergoing a Volume Phase Transition (VPT) close to ambient temperature. Although widely employed for fundamental research and application purposes, the modifications of the microgel internal structure occurring at the VPT are not yet completely understood, especially concerning the role of electrostatics. Here we study in detail, both experimentally and numerically, the effect of the addition of acrylic acid (AAc) co-monomer on the microgel deswelling process. By combining viscosimetry, light scattering and electrophoresis, we show that the progressive addition of AAc increases the microgel mass and suppresses

The key parameter controlling the glass transition of colloidal suspensions is ϕ, the fraction of the sample volume occupied by the particles. Unfortunately, changing ϕ by varying an external parameter, e.g. temperature T as in molecular glass formers, is not possible, unless one uses thermosensitive colloidal particles, like the popular poly(Nisopropylacrylamide) (PNiPAM) microgels. These however have several drawbacks, including high deformability, osmotic deswelling and interpenetration, which complicate their use as a model system to study the colloidal glass transition. Here, we propose a new system consisting of a colloidal suspension of non-deformable spherical silica nanoparticles, in which PNiPAM hydrogel spheres of ∼ 100 − 200 µm size are suspended. These non-colloidal 'mesogels' allow for controlling the sample volume effectively available to the silica nanoparticles and hence their ϕ, thanks to the T-induced change in mesogels volume. Using optical microscopy, we first show that the mesogels retain their ability to change size with T when suspended in Ludox suspensions, similarly as in water. We then show that their size is independent of the sample thermal history, such that a well-defined, reversible relationship between T and ϕ may be established. Finally, we use space-resolved dynamic light scattering to demonstrate that, upon varying T , our system exhibits a broad range of dynamical behaviors across the glass transition and beyond, comparable with those exhibited by a series of distinct silica nanoparticle suspensions of various ϕ.