Despite several decades of development, microfluidics lacks a sealing material that can be readily fabricated, leak-tight under high liquid water pressure, stable over a long time, and vacuum compatible. In this paper, we report the performances of a micro-scale processable sealing material for nanofluidic/microfluidics chip fabrication, which enables us to achieve all these requirements. We observed that micrometric walls made of SU-8 photoresist, whose thickness can be as low as 35 $μ$m, exhibit water pressure leak-tightness from 1.5 bar up to 5.5 bar, no water porosity even after 2 months of aging, and are able to sustain under $10^{-5}$ mbar vacuum. This sealing material is therefore reliable and versatile for building microchips, part of which must be isolated from liquid water under pressure or vacuum. Moreover, the fabrication process we propose does not require the use of aggressive chemicals or high-temperature or high-energy plasma treatment. It thus opens a new perspective to seal microchips where delicate surfaces such as nanomaterials are present.

Due to their atomically excellent structure and sp2-hybridization, carbon nanotubes (CNTs) have exceptional mechanical, thermal, and electrical properties. Single-walled CNTs (swCNTs) have recently gained interest as an intriguing host for the nanoscale confinement of fluids, with a variety of unexpected phenomena such as spontaneous filling, frictionless mass transport, unusual phase diagram etc[1]. The majority of these phenomena are still under debate and require experimental confirmation. However, it is challenging in this field to find experimental methods sensitive enough to carry out measurements at the level of individual nanotubes. The electronic properties of swCNTs are demonstrated to be sensitive to their diameter, defects, doping, adsorbates, and environment via swCNT field effect transistors (swCNT-FETs)[2], [3].In this contribution, we show that individual carbon nanotube field effect transistors (CNTFET) are the perfect tool for achieving this goal, enabling for the first time to accurate identification of water confined inside the nanotube. By investigating the electrical performances of several unopened and opened CNTFETs submitted to different atmosphere and temperature treatments, such as dry air, humidity, secondary vacuum, and current annealing, we demonstrate that it is possible to distinguish between water being outside and inside of the nanotube, just outside, or the nanotube free from water. Hence, we found that secondary vacuum and current annealing both shift the threshold gate voltage of opened swCNTs towards more negative values, however, the secondary vacuum had no effect on closed swCNTs compared to current annealing. In conclusion, the current annealing process is essential to distinguish water adsorbed outside from water confined inside swCNT. We demonstrate that this behavior is uniform across all devices’ metallicities, assuming that the nanotube’s surface has been pre-cleaned using current annealing. We will also discuss the mechanism behind the coupling of electronic transport and the presence of water.Our findings open up the possibility of using CNTFET to address long-standing issues in the nanofluidic community regarding the behavior of water confinement at the nanoscale, and also to use them for reliable, sensitive, and selective chemical and biological sensors.Reference:[1] T. A. Pascal, W. A. Goddard, and Y. Jung, “Entropy and the driving force for the filling of carbon nanotubes with water,” Proc. Natl. Acad. Sci., vol. 108, no. 29, pp. 11794–11798, 2011, doi: 10.1073/pnas.1108073108.[2] D. Cao et al., “Electronic sensitivity of carbon nanotubes to internal water wetting,” ACS Nano, vol. 5, no. 4, pp. 3113–3119, 2011, DOI: 10.1021/nn200251z.[3] I. Heller, A. M. Janssens, J. Männik, E. D. Minot, S. G. Lemay, and C. Dekker, “Identifying the mechanism of biosensing with carbon nanotube transistors,” Nano Lett., vol. 8, no. 2, pp. 591–595, 2008, DOI: 10.1021/nl072996i.

ObjectiveDentin, enamel and the transition zone, called the dentin-enamel junction (DEJ), have an organization and properties that play a critical role in tooth resilience and in stopping the propagation of cracks. Understanding their chemical and micro-biomechanical properties is then of foremost importance. The aim of this study is to apply Brillouin microscopy on a complex biological structure, that is, the DEJ, and to compare these results with those obtained with Raman microscopy.DesignBoth techniques allow noncontact measurements at the microscopic scale. Brillouin microscopy is based on the interaction between acoustic phonons and laser photons and gives a relation between the frequency shift of the scattered light and the stiffness of the sample. Raman spectra contain peaks related to specific chemical bonds.ResultsComparison of the Brillouin and Raman cartographies reveals correlations between mechanical and chemical properties. Indeed, the shapes of the phosphate content and stiffness curves are similar. The two spectroscopies give compatible values for the mean distance between two tubules, i.e., 4–6 µm. Moreover, for the first time, the daily cross striations of enamel could be studied, indicating a relationship between the variation in the phosphate concentration and the variation in the rigidity within the enamel prisms.ConclusionsWe demonstrate here the possibility of using Brillouin scattering microscopy to both study complex biological materials such as the enamel-dentin junction and visualize secondary structures. Correlations between the chemical composition and mechanical properties could help in better understanding the tissue histology.