Ref HAL: hal-02319058_v1
DOI: 10.1063/1.5111621
WoS: 000489308600038
Exporter : BibTex | endNote
Résumé:

The Raman modes of α-quartz-type boron phosphate were found to be extremely stable in frequency over a large temperature range from 300–1000 K. In order to determine the origin of this behavior, the material was also studied at high pressure up to 6 GPa. Upon compression, a classical behavior was observed with mode Grüneisen parameters ranging from −0.08(2) to 3.0(1). The present results indicate that the high temperature behavior in this material is an example of an unusual compensation effect between phonon–phonon interactions and implicit contributions due to thermal expansion. Phonon stability is of utmost importance for materials properties that are dependent on it such as dielectric and piezoelectric properties, for example. Boron phosphate belongs to the important class of α-quartz-type piezoelectric materials for which temperature stability is of primordial importance for resonator and sensor applications.

Ref HAL: hal-02302983_v1
DOI: 10.1021/acs.jpcc.9b04705
WoS: 000486360900040
Exporter : BibTex | endNote
3 Citations

Ref HAL: hal-02290446_v1
PMID 35619482
DOI: 10.1021/acsmacrolett.9b00508
WoS: 000482521100019
Exporter : BibTex | endNote
4 Citations
Résumé:

This paper presents an efficient way to measure the curing kinetics and gel point, αgel, in epoxy resins from one single experiment. The epoxy curing reaction is herein monitored using in situ and time-resolved near-infrared absorption spectroscopy (NIR). The curing profiles over different isothermal conditions are in good agreement with DSC. Furthermore, the increase of the NIR absorption bands of aromatic rings (unreactive throughout curing) probe the cure shrinkage, as more and more aromatic rings are localized within the fixed sample volume. Therefore, the gel point is determined using the onset of the aromatic absorption increase. The results are in good agreement with the theoretical gel point, as well as DMA results. This innovative approach enables gelation measurements on epoxy neat resins and film composites with an easy-to-perform, accurate, robust, and versatile method.

Ref HAL: hal-02273078_v1
DOI: 10.1021/acs.jpcc.9b04806
WoS: 000474796600017
Exporter : BibTex | endNote
4 Citations
Résumé:

The BiCuSeO-based compounds with very low thermal conductivity are among the most promising thermoelectric materials recently discovered. Their lattice dynamics, which remains mostly unexplored experimentally, is investigated in this paper. We report Raman experiments on BiCuSe1–xSxO solid solutions and infrared experiments on BiCuSeO and BiCuSO alloys coupled to first-principles-based calculations. We have observed that the high-energy A1g Raman-active mode strongly depends on the chalcogen content. We also report the density functional theory calculations of the dielectric and elastic constants, the phonons in the whole Brillouin zone, and the thermodynamic properties. We have determined the thermal expansion of BiCuSeO at room temperature from neutron diffraction experiments and evaluated its thermodynamic Grüneisen parameter and found a quite large value compared to other thermoelectric materials, which confirms the large anharmonicity of BiCuSeO.

Commentaires: jp9b04806_si_001.pdf (1.0 MB)

Ref HAL: hal-02179554_v1
Exporter : BibTex | endNote
Résumé:

To date, aqueous stable graphene flakes solutionscan be obtained by simple REDOX reactions.1–5 Most of the current applications regardinggraphene require ordered nanostructuredcomposites materials. Liquid crystal phases orderingrepresent an opportunity to arrange theminto macroscopic assemblies with long-rangeordering. 1,2 Preparing organized materials andthin films from these dispersions then requires agood control of the liquid crystal ordering duringthe deposition and the drying of the films. As amatter of fact, it turns out that graphene flakeseasily align at high shear.3,4 On the other hand,Graphene Flakes Liquid Crystals (GFLC) exhibita very interesting behaviour at low shear or undersmall displacements, thin films often showspeculiar patterns (such as the periodic texturesshown in Fig.72-72). We have shown how tocreate and stabilize large-sized periodic texturesin GFLC. The patterns have been characterizedunder optical and electronic microscopies. Theirstability can be explained by the competition betweenthe anchoring field of the substrate andthe presence of a yield stress resulting fromthe peculiar elastic and rheological properties ofthe GFLC. Our findings also clarify why longstandinghypotheses on the presence of exoticphases1 at large concentrations are present inthe literature.
References[1] Zakri, C.; Blanc, C.; Grelet, E.; Zamora-Ledezma, C.; Puech, N.; Anglaret, E.; Poulin, P. Philosophical Transactions of theRoyal Society A: Mathematical, Physical and Engineering Sciences 2013, 371, 20120499..
[2] Zamora-Ledezma, C.; Puech, N.; Zakri, C.; Grelet, E.; Moulton, S. E.; Wallace, G. G.; Gambhir, S.; Blanc, C.; Anglaret, E.;Poulin, P. The journal of physical chemistry letters 2012, 3, 2425–2430..
[3] Poulin, P.; Jalili, R.; Neri, W.; Nallet, F.; Divoux, T.; Colin, A.; Aboutalebi, S. H.; Wallace, G.; Zakri, C. Proceedings of theNational Academy of Sciences 2016, 113, 11088–11093..
[4] Zamora-Ledezma, C.; Jeridi, H.; Anglaret, E.; Blanc, C. Orientations and periodic textures in graphene liquid crystals. 27thInternational Liquid Crystal Conference (ILCC2018). 2018..
[5] Xu, Z.; Gao, C. Nature communications 2011, 2, 571.

Ref HAL: hal-02178431_v1
Exporter : BibTex | endNote
Résumé:

Dye encapsulation into host single-walled carbon nanotubes is an elegant way to create hybrid nano-systems with tunable opto-electronic properties. To this aim, different kinds of molecules (either electron donor or acceptor, absorbing either in the blue or the red visible range) are encapsulated into metallic or semiconducting nanotubes displaying different diameters. Up to now, we have mainly studied encapsulated quaterthiophene derivatives (4T), tetracyanoquinodimethane (TCNQ) and phthalocyanine (MPc) molecules. In this work, we discuss the supramolecular organization of dyes inside the nanotube, the optical properties and the charge transfer for some of our hybrid systems. For instance, using Raman spectroscopy, a significant electron transfer is reported with 4T, whose magnitude strongly depends on the nanotube diameter, and on the metallic or semiconducting character. Experiments also suggest a photo-activated electron transfer for small diameter (~9 Å) semiconducting and metallic tubes. Confinement of electron donor (4T) (respectively electron acceptor (TCNQ)) into small diameter tubes leads to a red shift (blue shift) of the optical absorption energy and an increase (decrease) of the photoluminescence intensities, evidenced by the photoluminescence excitation maps.

Ref HAL: hal-02178427_v1
DOI: 10.1016/j.carbon.2019.04.041
WoS: WOS:000471602000083
Exporter : BibTex | endNote
2 Citations
Résumé:

Dye confinement into carbon nanotube significantly affects the electronic charge density distribution of the final hybrid system. Using the electron-phonon coupling sensitivity of the Raman G-band, we quantify experimentally how charge transfer from thiophene oligomers to single walled carbon nanotube is modulated by the diameter of the nano-container and its metallic or semiconducting character. This charge transfer is shown to restore the electron-phonon coupling into defected metallic nanotubes. For sub-nanometer diameter tube, an electron transfer optically activated is observed when the excitation energy matches the HOMO-LUMO transition of the confined oligothiophene. This electron doping accounts for an important enhancement of the photoluminescence intensity up to a factor of nearly six for optimal confinement configuration. This electron transfer shifts the Fermi level, acting on the photoluminescence efficiency. Therefore, thiophene oligomer encapsulation allows modulating the electronic structure and then the optical properties of the hybrid system.