The field of ion transport through carbon nanotubes (CNTs) is marked by a large variability of the ionic conductance values reported by different groups. There is also a large uncertainty concerning the relative contributions of channel and access resistances in the experimentally measured currents, both depending on experimental parameters (nanotube length and diameter). In this perspective article, we discuss the ionic conductance values reported so far in the case of 2 individual CNTs and compare them with standard nano-fluidic models considering both the access and channel resistances. With a view toward guiding experimentalists, we thus show in which conditions the access or the channel resistance can predominate in CNTs. We explain in particular that it is not justified to use phenomenological models neglecting the channel resistance in the case of micrometer-long CNTs. This comparison reveals that most experimental conductance values can be explained in the framework of current nanofluidic models by considering experimental variations of slip length and surface charge density and that just a few extraordinarily high values cannot be accounted for even using extreme parameter values. Finally, we discuss how to complete existing models and how to improve the statistical reliability of experimental data in the field.

Twisted bilayer graphene is a fascinating system due to the possibility of tuning the electronic and optical properties by controlling the twisting angle θ between the layers. The coupling between the Dirac cones of the two graphene layers gives rise to van Hove singularities (vHs) in the density of electronic states, whose energies vary with θ. Raman spectroscopy is a fundamental tool to study twisted bilayer graphene (TBG) systems since the Raman response is hugely enhanced when the photons are in resonance with transition between vHs and new peaks appear in the Raman spectra due to phonons within the interior of the Brillouin zone of graphene that are activated by the Moiré superlattice. It was recently shown that these new peaks can be activated by the intralayer and the interlayer electron–phonon processes. In this work we study how each one of these processes enhances the intensities of the peaks coming from the acoustic and optical phonon branches of graphene. Resonance Raman measurements, performed in many different TBG samples with θ between 4∘ and 16∘ and using several different laser excitation energies in the near-infrared (NIR) and visible ranges (1.39–2.71 eV), reveal the distinct enhancement of the different phonons of graphene by the intralayer and interlayer processes. Experimental results are nicely explained by theoretical calculations of the double-resonance Raman intensity in graphene by imposing the momentum conservation rules for the intralayer and the interlayer electron–phonon resonant conditions in TBGs. Our results show that the resonant enhancement of the Raman response in all cases is affected by the quantum interference effect and the symmetry requirements of the double resonance Raman process in graphene.

The development of smart nanomaterials has attracted great attention in several fields like nanoscience and nanotechnology due to their unique response to external stimuli. Many of them are based on polymers that can exhibit a shape-changes when submitted to environmental modifications. Poly(N-isopropylacrylamide), PNIPAM, is a thermo-responsive polymer. Linear chains are water soluble at room temperature but undergo a reversible coil-to-globule transition at a lower critical solution temperature (LCST) close to 32°C due to the dehydration and subsequent collapse of its chains into compact globules. [1] This phenomenon results in a volume phase transition (VPT) in PNIPAM based crosslinked microgels and can be used to promote original thermal effects.Hybrid nanocomposite microgels associating PNIPAM and gold nanoparticles (GNP) have thus been designed in order to take advantage of the outstanding plasmonic and photo-thermal properties of GNP to promote the VPT of the microgels through an efficient photo-thermal conversion. [2] With their strong diameter-dependent optical absorption in the near infrared (NIR) and their large surface area favoring photo-thermal transfer, semiconducting single-walled carbon nanotubes (s-SWNT) are also good candidates for photo-thermal conversion in the NIR (Figure 1a). However, to the best of our knowledge, no thorough studies of nanomaterials based on both SWNT and PNIPAM have been reported so far.Here we describe the preparation of SWNT/PNIPAM hybrid microgels through a non-covalent functionalization technique. These nanoparticles are stable in water and show a VPT, which can be promoted either by direct heating or by excitation of the resonant absorption of s-SWNT in the NIR (Figure 1b-c). The photoluminescence (PL) signal can be used to monitor the VPT by a redshift observed when crossing the LCST, while the Raman signatures remain essentially the same.

The development of smart nanomaterials has attracted great attention in several fields like nanoscience, materials science,engineering and nanotechnology due to their unique response to external stimuli. Many of them are based on polymers thatcan exhibit great shape-changes when submitted to environmental modifications. Poly(N-isopropylacrylamide), PNIPAM, is sucha thermo-responsive polymer. It is water soluble at room temperature, forming gels by cross-linking but undergoes a reversiblecoil-to-globule volume phase transition (VPT) at a lower critical solution temperature (LCST) close to 32 °C due to thedehydration and subsequent collapse of its chains into compact globules.
Hybrid nanocomposite microgels associating PNIPAM and gold nanoparticles (GNP) have been designed in order to takeadvantage of the outstanding plasmonic and photo-thermal properties of GNP to promote the volume phase transition of themicrogels through an efficient photo-thermal conversion. With their strong diameter-dependent optical absorption in the nearinfrared (NIR) and their large surface area favoring photo-thermal transfer, semiconducting SWNT (s-SWNT) are goodcandidates for photo-thermal conversion in the NIR and may therefore be used to prepare multi-responsive hybrid microgels(Figure 1). However, to the best of our knowledge, no thorough studies of such nanomaterials have been reported so far.
Here we report the preparation of smart SWNT/PNIPAM nanocomposites through non-covalent functionalization techniques.These SWNT/PNIPAM hybrid microgels are stable in water and show a VPT, which can be promoted either by direct heating orby excitation of the resonant absorption of s-SWNT in the near infrared. Furthermore, the photoluminescence (PL) signal of s-SWNT is modulated at the phase transition and therefore, the PL signal can be used to monitor the VPT. This is illustrated inFigure 2, showing coupled Raman/PL measurements below and above the LCST, where a redshift of the PL bands is observedwhen crossing the LCST while the Raman signatures remain essentially the same.

Temperature is one of the basic parameters often required to characterize a system. A great demand has arisen for localmeasurements, especially in liquids or complex biological environments. Various approaches have been proposed to study thetemperature at the nano-scale level. Some of them are based on the spectroscopic properties of carbon nanotubes (CNT) usedas sensors.
Raman spectroscopy is indeed a powerful technique to identify single-walled carbon nanotubes (SWNT) and to study theirstructure, defects and electronic properties through the measurement of specific Raman signatures (RBM, D, G and 2D bands).On the other hand, individual SWNT or small bundles emit light in the near infrared and the photoluminescence (PL) spectra isvery sensitive to the quality of the dispersion and the dielectric environment of the nanotubes. In particular, when SWNT aredispersed in aqueous solutions, the PL energies are sensitive to the nature of the surfactants or polymers, to theirconcentration, and to the way they adsorb on/wrap around the nanotubes.
In this work we show that the PL/Raman spectra of SWNT dispersed with sodium dodecyl sulfate (SDS) is very sensitive to thetemperature (figure 1) in a large range of SDS concentrations. We discuss the influence of the chiral angle of the SWNT onthese PL changes, and the origin of the changes in terms of SDS reorganization at the surface of the nanotubes. Similarchanges are obtained with increasing laser power (figure 2), showing the local heating of the nanotubes. These results pavethe way for the development of SWNT-based nano-thermometers.

Downsizing electronic and electric equipment requires the optimization of electric field distributions in order to avoid localized dielectric breakdown (also called partial discharges). This paper presents a novel dielectric composite material aimed at grading electrical local surface stress. This functional material has a conductivity which increases by several orders with the applied electric field giving the ability to distribute the field by itself. It is prepared for the first time by dispersing graphite nanoplatelets in a polymer and may be used as a resistive or capacitive field grading material in electronic and electrical applications. Mechanisms at the origin of the nonlinear behavior are discussed.